Oil-free scroll compressor

Release time:

2023/11/10

Oil-free scroll air compressor consists of oil-free scroll compressor, permanent magnet synchronous motor, radiator, pipe integrated valve group and controller.

1、Oil-free scroll air compressor consists of two double function equations line of dynamic and static scroll disk meshing with each other.

2, in the suction, compression, exhaust process, the static disk is fixed in the frame, the dynamic disk is driven by the eccentric shaft and constrained by the anti-rotation mechanism, around the center of the static disk base circle, do a small radius of the plane rotation

3, the gas is sucked into the periphery of the static disk through the air cartridge, with the eccentric shaft rotating, the gas is gradually compressed in a number of crescent-shaped compression chamber combined with the dynamic and static disk phagocytosis, and then discharged by the static disk parts of the axial holes continuously

Keyword

How to maximize compressor efficiency? Poke in and find out!

What is the difference between a silent oil-free air compressor and a regular air compressor?

: Next Page

How to maximize compressor efficiency? Poke in and find out!

What is the difference between a silent oil-free air compressor and a regular air compressor?

Recommend News

Air Handling Components

The common components of this part are: regulator, air dryer {with regulator function}, four circuit protection valve or air treatment unit.1. Regulator (see Figure 1): X80 ~ 90 years on China's commercial vehicles (using air brake) commonly used regulator to control the compressed air system pressure and unloading of the compressor.

2023-11-10

Compressed air management systems for commercial vehicles

In our country and in Europe, more and more trucks and buses are using air as a power source to realize the control of the vehicle's braking, gating and air suspension systems, etc. We usually call the generation, treatment and storage of compressed air in the respective storage cylinders as required an air management system. The system mainly consists of: air compressor, air handling components (regulator or air dryer, protection valve, air handling unit, etc.), storage cylinder.